 |
|
|
Re-application
of WoodOil will be required when the surface exhibits signs of losing capability
to "bead water" or colour tone is faded. Keep in mind that durability
of water repellency & colour tone is proportional to the amount of WoodOil
in the timber. Thicker timbers will require additional coats to offer this
durability. For on going preservation only, one coat should be applied every
5-8 years given appropriate initial coats. "Please read notes on colour
toning." We recommend annual washing of the surface to remove surface contaminants (dust, pollen, etc) with clean water. This should also be done prior to any re-coats of WoodOil if in good maintenance. If for any reason maintenance has not been kept up a stronger wash (see details on 'other products' page) may be required prior to re-coating with WoodOil. |
|
Clean
up with mineral turpentine or hot water & detergent for, spray equipment,
brushes & clothes. These also help with over spray or accidental spillage
on unwanted surfaces such as windows, use a wiping rag on smooth surfaces
& a brush on rough surfaces |